Rim Tape Peaty's Holeshot Rim Tape 32 MM - 10 M black

Peaty's Holeshot Rim Tape

Holeshot Tubeless Rim Tape creates a strong, airtight seal with your rim and leaves no mess behind when removed! With the perfect amount of stretch and a large, rigid recyclable core, the tape can be pulled and applied with tension, contouring tightly to your rim for a secure fit.

• Length: 10 m
• Width: 32 mm

Installation procedure for rim tape

1. Remove tyre and any old rim tape - Use Disc brake cleaner to remove any grease.
2. Clean and degrease rim thoroughly, ensuring rim is completely dry before application.
3. Starting two spokes behind the valve hole, press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
4. Run tape around the rim while keeping tape tension, finishing two spoke holes beyond the valve hole.
5. Check for any trapped air underneath the rim tape - push air bubbles out to a spoke hole to remove
6. Use a small spike to pierce the tape in the centre of the valve hole.
7. Remove dust cap, lock ring and o-ring then push valve stem through the valve hole.
8. Re-apply the o-ring and apply lock ring tightly by hand, ensuring there are no air gaps.
9. Refit tyre, add Peaty’s Tubeless Sealant.
10. Inflate tyre to desired pressure.
11. RIDE!