Bike Tool OneUp EDC Lite blue

OneUp EDC Lite Stem Tool

Attention! Always check the compatibility of your fork first.*

The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again.

• The tool contains the following keys:
  • Allen key 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm
  • Torx T25
  • Flat head screwdriver
• Low weight of only 75 g
• Easy installation in less than 5 min

*Compatibility

The inner diameter of the fork post must be at least 24.1 mm.

Steerer tube length: Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem:

• Fox forks – 190 mm minimum
• RockShox forks – 210 mm minimum
• All other compatible forks – 190mm minimum

Incompatible forks: Giant Overdrive 2, Rock Shock 35, Cannondale Lefty, carbon steerer forks.