Surfboard Repair Kit Phix Doctor Epoxy Kit 3 Oz Bio Resin (Eps / Styrofoam)

Phix Doctor 2:1 Epoxy Kit Small Bio Resin Surf Repair Kit

Scratches, dents, chips—they’re all part of surfing, too. If you surf, learn how to give your board first aid. All you need is a little skill and a high-quality repair kit from Phix Doctor.

The 2:1 Epoxy Kit contains everything you’ll need for both minor and major repairs. It’s designed for epoxy boards with EPS/Styrofoam or polyurethane foam cores.

Inside, you’ll find 88 ml of bio-based epoxy resin, which is clear and used by many pros who prioritize both performance and sustainability. The kit includes Q-Cell for larger fill areas, fiberglass cloth, sanding paper for smoothing out unevenness, overlay sheets, as well as accessories such as gloves and mixing sticks with a cup.

Included

• 88 ml SUPER SAP® ONE bio epoxy resin for repairing epoxy boards with EPS/Styrofoam or polyurethane foam filling
• Hardener
• Q-Cell for filling larger cavities
• Fiberglass 17.8 × 34.2 cm
• Protective gloves
• Double sandpaper
• Smooth cover sheets
• Stirrer cups for easy preparation and application

Instructions for Use

• Start by sanding the surface, cleaning it, and drying it for good adhesion of the compound.
• 2:1 basic mix: Mix 2 parts resin in one bowl, 1 part hardener in another. Then mix the resin and hardener in a 3rd cup, mix for 1 minute and then apply.
• In case of deeper holes, they need to be filled: Then add Q-Cell powder to the base mixture and mix thoroughly. Once a solid but still fluid mixture is formed, fill the hole with it, leaving space for a surface layer of epoxy or fiberglass.
• If the hole is longer than 0.5 cm: Before applying the mixture, apply fiberglass, which should extend about 1 cm beyond the hole/abrasion. If the damage is larger, the fiberglass should extend more. Apply the epoxy base mixture so that the fiber is sufficiently saturated.
• After applying the mixture to the damage, a smooth cover sheet can be applied to make it easier to create a contour.
• Once hardened, you can remove the cover sheet and sand the surface smooth.
• TIP: The key to success is at least room temperature, really thorough measuring in a 2:1 ratio, and thorough mixing.